RIP Packet Format Planned maintenance scheduled April 23, 2019 at 23:30 UTC (7:30 pm US/Eastern) Announcing the arrival of Valued Associate #679: Cesar Manara Unicorn Meta Zoo #1: Why another podcast?RIP routing is broken between two routersWhy is RIP not scalable?Why we can not ping to multicast address 224.0.0.9 of RIPRouters are not learning routes when using RIPHow does OSPF understand its directly connected networks if you're configuring interfaces?How do you define cost in Quagga for BGP and RIP?Does RIP stores information about entire AS?Why is RIP sending classless updates?Clarifications about RIP and OSPFthe difference between RIP and OSPF
Feather, the Redeemed and Dire Fleet Daredevil
Will I be more secure with my own router behind my ISP's router?
The 'gros' functor from schemes into (strictly) locally ringed topoi
Has a Nobel Peace laureate ever been accused of war crimes?
What's parked in Mil Moscow helicopter plant?
How to begin with a paragraph in latex
How to translate "red flag" into Spanish?
How to keep bees out of canned beverages?
What does こした mean?
false 'Security alert' from Google - every login generates mails from 'no-reply@accounts.google.com'
When does Bran Stark remember Jamie pushing him?
Are these square matrices always diagonalisable?
Is Bran literally the world's memory?
Why do people think Winterfell crypts is the safest place for women, children & old people?
What *exactly* is electrical current, voltage, and resistance?
Variable does not exist: sObjectType (Task.sObjectType)
Is it appropriate to mention a relatable company blog post when you're asked about the company?
What is a 'Key' in computer science?
How to compute a Jacobian using polar coordinates?
Specify the range of GridLines
Are there existing rules/lore for MTG planeswalkers?
What happened to Viserion in Season 7?
Where to find documentation for `whois` command options?
Why isn't everyone flabbergasted about Bran's "gift"?
RIP Packet Format
Planned maintenance scheduled April 23, 2019 at 23:30 UTC (7:30 pm US/Eastern)
Announcing the arrival of Valued Associate #679: Cesar Manara
Unicorn Meta Zoo #1: Why another podcast?RIP routing is broken between two routersWhy is RIP not scalable?Why we can not ping to multicast address 224.0.0.9 of RIPRouters are not learning routes when using RIPHow does OSPF understand its directly connected networks if you're configuring interfaces?How do you define cost in Quagga for BGP and RIP?Does RIP stores information about entire AS?Why is RIP sending classless updates?Clarifications about RIP and OSPFthe difference between RIP and OSPF
I am trying to investigate a RIP packet. It clearly states that the packet is RIP v1. But its format does not match with the either RIP v1 or v2. Any ideas what this packet actually is?
routing packet-analysis rip
asked 5 hours ago
BatBat
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
add a comment |
I am trying to investigate a RIP packet. It clearly states that the packet is RIP v1. But its format does not match with the either RIP v1 or v2. Any ideas what this packet actually is?
routing packet-analysis rip
asked 5 hours ago
BatBat
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
You should use the verbose output (-vv) to get more information with the full protocol decode.
– Ron Maupin♦
5 hours ago
I don't have further access to the system. Is it possible to decode via only this packet? @RonMaupin
– Bat
5 hours ago
add a comment |
I am trying to investigate a RIP packet. It clearly states that the packet is RIP v1. But its format does not match with the either RIP v1 or v2. Any ideas what this packet actually is?
routing packet-analysis rip
asked 5 hours ago
BatBat
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
I am trying to investigate a RIP packet. It clearly states that the packet is RIP v1. But its format does not match with the either RIP v1 or v2. Any ideas what this packet actually is?
routing packet-analysis rip
routing packet-analysis rip
asked 5 hours ago
BatBat
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
BatBat
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
BatBat
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
BatBat
1133
asked 5 hours ago
BatBat
1133
1133
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Bat is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
You should use the verbose output (-vv) to get more information with the full protocol decode.
– Ron Maupin♦
5 hours ago
I don't have further access to the system. Is it possible to decode via only this packet? @RonMaupin
– Bat
5 hours ago
add a comment |
You should use the verbose output (-vv) to get more information with the full protocol decode.
– Ron Maupin♦
5 hours ago
I don't have further access to the system. Is it possible to decode via only this packet? @RonMaupin
– Bat
5 hours ago
You should use the verbose output (
-vv) to get more information with the full protocol decode.– Ron Maupin♦
5 hours ago
You should use the verbose output (
-vv) to get more information with the full protocol decode.– Ron Maupin♦
5 hours ago
I don't have further access to the system. Is it possible to decode via only this packet? @RonMaupin
– Bat
5 hours ago
I don't have further access to the system. Is it possible to decode via only this packet? @RonMaupin
– Bat
5 hours ago
add a comment |
3 Answers
3
active
oldest
votes
It's a RIPv1 packet. You're looking at the full IP packet. RIP starts at 0x001c.
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
3
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
add a comment |
One way to solve this kind of problem is to make a PCAP file from the data (with a tool or just a programming language such as python), and then use standard tools to examine it.
Your packet analysed with tshark is:
Internet Protocol Version 4, Src: 128.238.62.2, Dst: 255.255.255.255
0100 .... = Version: 4
.... 0101 = Header Length: 20 bytes (5)
Differentiated Services Field: 0xc0 (DSCP: CS6, ECN: Not-ECT)
1100 00.. = Differentiated Services Codepoint: Class Selector 6 (48)
.... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
Total Length: 72
Identification: 0x0000 (0)
Flags: 0x0000
0... .... .... .... = Reserved bit: Not set
.0.. .... .... .... = Don't fragment: Not set
..0. .... .... .... = More fragments: Not set
...0 0000 0000 0000 = Fragment offset: 0
Time to live: 2
[Expert Info (Note/Sequence): "Time To Live" only 2]
["Time To Live" only 2]
[Severity level: Note]
[Group: Sequence]
Protocol: UDP (17)
Header checksum: 0xf8f5 [validation disabled]
[Header checksum status: Unverified]
Source: 128.238.62.2
Destination: 255.255.255.255
User Datagram Protocol, Src Port: 520, Dst Port: 520
Source Port: 520
Destination Port: 520
Length: 52
Checksum: 0xb9a0 [unverified]
[Checksum Status: Unverified]
[Stream index: 0]
Routing Information Protocol
Command: Response (2)
Version: RIPv1 (1)
IP Address: 128.238.63.0, Metric: 1
Address Family: IP (2)
IP Address: 128.238.63.0
Metric: 1
IP Address: 128.238.64.0, Metric: 2
Address Family: IP (2)
IP Address: 128.238.64.0
Metric: 2
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
add a comment |
This is a response header. Response means ' A message containing all or part of the sender's routing table. This message may be sent in response to a request or poll, or it may be an update message generated by the sender.'
In addition to that you can see sender ip address and subnet.
If you want to see more details you can use -vv
answered 5 hours ago
serverAdmin123serverAdmin123
39517
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "496"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Bat is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fnetworkengineering.stackexchange.com%2fquestions%2f58674%2frip-packet-format%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
3 Answers
3
active
oldest
votes
3 Answers
3
active
oldest
votes
active
oldest
votes
active
oldest
votes
It's a RIPv1 packet. You're looking at the full IP packet. RIP starts at 0x001c.
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
3
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
add a comment |
It's a RIPv1 packet. You're looking at the full IP packet. RIP starts at 0x001c.
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
3
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
add a comment |
It's a RIPv1 packet. You're looking at the full IP packet. RIP starts at 0x001c.
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
It's a RIPv1 packet. You're looking at the full IP packet. RIP starts at 0x001c.
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
edited 33 mins ago
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
answered 5 hours ago
Ron TrunkRon Trunk
40.2k33781
40.2k33781
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
3
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
add a comment |
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
3
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
The problem is that IP 128.238.62.2 (80ee 3e02) appears at the end of the first line. According to the rip v1, the previous 2 bytes should be zero but they have a value of f8f5.
– Bat
4 hours ago
3
3
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
That's the source IP in the IP header. Then you have the UDP header, then you have the RIP packet starting at 0x0016.
– Ron Trunk
4 hours ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@RonTrunk ... IP starts at 0x0, UDP starts at 0x14 (port, port, length, checksum), surely RIP starts at 0x1c with bytes 0x0201: 0x02 = Response, 0x01 = RIP1.
– jonathanjo
1 hour ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
@jonathanjo Thanks fo catching that. I edited my answer.
– Ron Trunk
32 mins ago
add a comment |
One way to solve this kind of problem is to make a PCAP file from the data (with a tool or just a programming language such as python), and then use standard tools to examine it.
Your packet analysed with tshark is:
Internet Protocol Version 4, Src: 128.238.62.2, Dst: 255.255.255.255
0100 .... = Version: 4
.... 0101 = Header Length: 20 bytes (5)
Differentiated Services Field: 0xc0 (DSCP: CS6, ECN: Not-ECT)
1100 00.. = Differentiated Services Codepoint: Class Selector 6 (48)
.... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
Total Length: 72
Identification: 0x0000 (0)
Flags: 0x0000
0... .... .... .... = Reserved bit: Not set
.0.. .... .... .... = Don't fragment: Not set
..0. .... .... .... = More fragments: Not set
...0 0000 0000 0000 = Fragment offset: 0
Time to live: 2
[Expert Info (Note/Sequence): "Time To Live" only 2]
["Time To Live" only 2]
[Severity level: Note]
[Group: Sequence]
Protocol: UDP (17)
Header checksum: 0xf8f5 [validation disabled]
[Header checksum status: Unverified]
Source: 128.238.62.2
Destination: 255.255.255.255
User Datagram Protocol, Src Port: 520, Dst Port: 520
Source Port: 520
Destination Port: 520
Length: 52
Checksum: 0xb9a0 [unverified]
[Checksum Status: Unverified]
[Stream index: 0]
Routing Information Protocol
Command: Response (2)
Version: RIPv1 (1)
IP Address: 128.238.63.0, Metric: 1
Address Family: IP (2)
IP Address: 128.238.63.0
Metric: 1
IP Address: 128.238.64.0, Metric: 2
Address Family: IP (2)
IP Address: 128.238.64.0
Metric: 2
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
add a comment |
One way to solve this kind of problem is to make a PCAP file from the data (with a tool or just a programming language such as python), and then use standard tools to examine it.
Your packet analysed with tshark is:
Internet Protocol Version 4, Src: 128.238.62.2, Dst: 255.255.255.255
0100 .... = Version: 4
.... 0101 = Header Length: 20 bytes (5)
Differentiated Services Field: 0xc0 (DSCP: CS6, ECN: Not-ECT)
1100 00.. = Differentiated Services Codepoint: Class Selector 6 (48)
.... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
Total Length: 72
Identification: 0x0000 (0)
Flags: 0x0000
0... .... .... .... = Reserved bit: Not set
.0.. .... .... .... = Don't fragment: Not set
..0. .... .... .... = More fragments: Not set
...0 0000 0000 0000 = Fragment offset: 0
Time to live: 2
[Expert Info (Note/Sequence): "Time To Live" only 2]
["Time To Live" only 2]
[Severity level: Note]
[Group: Sequence]
Protocol: UDP (17)
Header checksum: 0xf8f5 [validation disabled]
[Header checksum status: Unverified]
Source: 128.238.62.2
Destination: 255.255.255.255
User Datagram Protocol, Src Port: 520, Dst Port: 520
Source Port: 520
Destination Port: 520
Length: 52
Checksum: 0xb9a0 [unverified]
[Checksum Status: Unverified]
[Stream index: 0]
Routing Information Protocol
Command: Response (2)
Version: RIPv1 (1)
IP Address: 128.238.63.0, Metric: 1
Address Family: IP (2)
IP Address: 128.238.63.0
Metric: 1
IP Address: 128.238.64.0, Metric: 2
Address Family: IP (2)
IP Address: 128.238.64.0
Metric: 2
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
add a comment |
One way to solve this kind of problem is to make a PCAP file from the data (with a tool or just a programming language such as python), and then use standard tools to examine it.
Your packet analysed with tshark is:
Internet Protocol Version 4, Src: 128.238.62.2, Dst: 255.255.255.255
0100 .... = Version: 4
.... 0101 = Header Length: 20 bytes (5)
Differentiated Services Field: 0xc0 (DSCP: CS6, ECN: Not-ECT)
1100 00.. = Differentiated Services Codepoint: Class Selector 6 (48)
.... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
Total Length: 72
Identification: 0x0000 (0)
Flags: 0x0000
0... .... .... .... = Reserved bit: Not set
.0.. .... .... .... = Don't fragment: Not set
..0. .... .... .... = More fragments: Not set
...0 0000 0000 0000 = Fragment offset: 0
Time to live: 2
[Expert Info (Note/Sequence): "Time To Live" only 2]
["Time To Live" only 2]
[Severity level: Note]
[Group: Sequence]
Protocol: UDP (17)
Header checksum: 0xf8f5 [validation disabled]
[Header checksum status: Unverified]
Source: 128.238.62.2
Destination: 255.255.255.255
User Datagram Protocol, Src Port: 520, Dst Port: 520
Source Port: 520
Destination Port: 520
Length: 52
Checksum: 0xb9a0 [unverified]
[Checksum Status: Unverified]
[Stream index: 0]
Routing Information Protocol
Command: Response (2)
Version: RIPv1 (1)
IP Address: 128.238.63.0, Metric: 1
Address Family: IP (2)
IP Address: 128.238.63.0
Metric: 1
IP Address: 128.238.64.0, Metric: 2
Address Family: IP (2)
IP Address: 128.238.64.0
Metric: 2
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
One way to solve this kind of problem is to make a PCAP file from the data (with a tool or just a programming language such as python), and then use standard tools to examine it.
Your packet analysed with tshark is:
Internet Protocol Version 4, Src: 128.238.62.2, Dst: 255.255.255.255
0100 .... = Version: 4
.... 0101 = Header Length: 20 bytes (5)
Differentiated Services Field: 0xc0 (DSCP: CS6, ECN: Not-ECT)
1100 00.. = Differentiated Services Codepoint: Class Selector 6 (48)
.... ..00 = Explicit Congestion Notification: Not ECN-Capable Transport (0)
Total Length: 72
Identification: 0x0000 (0)
Flags: 0x0000
0... .... .... .... = Reserved bit: Not set
.0.. .... .... .... = Don't fragment: Not set
..0. .... .... .... = More fragments: Not set
...0 0000 0000 0000 = Fragment offset: 0
Time to live: 2
[Expert Info (Note/Sequence): "Time To Live" only 2]
["Time To Live" only 2]
[Severity level: Note]
[Group: Sequence]
Protocol: UDP (17)
Header checksum: 0xf8f5 [validation disabled]
[Header checksum status: Unverified]
Source: 128.238.62.2
Destination: 255.255.255.255
User Datagram Protocol, Src Port: 520, Dst Port: 520
Source Port: 520
Destination Port: 520
Length: 52
Checksum: 0xb9a0 [unverified]
[Checksum Status: Unverified]
[Stream index: 0]
Routing Information Protocol
Command: Response (2)
Version: RIPv1 (1)
IP Address: 128.238.63.0, Metric: 1
Address Family: IP (2)
IP Address: 128.238.63.0
Metric: 1
IP Address: 128.238.64.0, Metric: 2
Address Family: IP (2)
IP Address: 128.238.64.0
Metric: 2
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
answered 1 hour ago
jonathanjojonathanjo
12.4k1938
12.4k1938
add a comment |
add a comment |
This is a response header. Response means ' A message containing all or part of the sender's routing table. This message may be sent in response to a request or poll, or it may be an update message generated by the sender.'
In addition to that you can see sender ip address and subnet.
If you want to see more details you can use -vv
answered 5 hours ago
serverAdmin123serverAdmin123
39517
add a comment |
This is a response header. Response means ' A message containing all or part of the sender's routing table. This message may be sent in response to a request or poll, or it may be an update message generated by the sender.'
In addition to that you can see sender ip address and subnet.
If you want to see more details you can use -vv
answered 5 hours ago
serverAdmin123serverAdmin123
39517
add a comment |
This is a response header. Response means ' A message containing all or part of the sender's routing table. This message may be sent in response to a request or poll, or it may be an update message generated by the sender.'
In addition to that you can see sender ip address and subnet.
If you want to see more details you can use -vv
answered 5 hours ago
serverAdmin123serverAdmin123
39517
This is a response header. Response means ' A message containing all or part of the sender's routing table. This message may be sent in response to a request or poll, or it may be an update message generated by the sender.'
In addition to that you can see sender ip address and subnet.
If you want to see more details you can use -vv
answered 5 hours ago
serverAdmin123serverAdmin123
39517
answered 5 hours ago
serverAdmin123serverAdmin123
39517
answered 5 hours ago
serverAdmin123serverAdmin123
39517
answered 5 hours ago
serverAdmin123serverAdmin123
39517
39517
add a comment |
add a comment |
Bat is a new contributor. Be nice, and check out our Code of Conduct.
Bat is a new contributor. Be nice, and check out our Code of Conduct.
Bat is a new contributor. Be nice, and check out our Code of Conduct.
Bat is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Network Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fnetworkengineering.stackexchange.com%2fquestions%2f58674%2frip-packet-format%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
You should use the verbose output (
-vv) to get more information with the full protocol decode.– Ron Maupin♦
5 hours ago
I don't have further access to the system. Is it possible to decode via only this packet? @RonMaupin
– Bat
5 hours ago